Triumph Adler CX 8682 Instruction Handbook Manual Download Page 48

Page: 48 / 102

CHAPTER 6 CONVENIENT FUNCTIONS

6-2

(Inch)

(Metric)

(Inch)

(Metric)

(Inch)

(Metric)

(Inch)

(2) Copy size fine adjustment

Set this function when the copy image size is different from the
original image size.

Press the Output Adj. key.

Press the

▼

▲

key to select “Fusing size”.

Press the OK key.

To adjust the copy size in the widthwise (X) direction, press
the

key.

To adjust the copy size in the lengthwise (Y) direction, press
the

▼

▲

key.

The size can be set between -3.0% and 3.0% in 0.1%
increments.

Press the OK key.

Press the Output Adj. key.
The machine will return to the basic screen. The symbol that
indicates copy size fine adjustment will appear at the bottom
of the display.

Summary of Contents for CX 8682







































































































Search results

Summary of Contents for CX 8682

Reviews:

Related manuals for CX 8682

Brands by name

Popular brands

Triumph Adler CX 8682, Instruction Handbook Manual

Search results

Summary of Contents for CX 8682

Reviews:

Related manuals for CX 8682

Brands by name

Popular brands