Triumph Adler CX 8682 Instruction Handbook Manual Download Page 77

Page: 77 / 102

CHAPTER 7 MANAGEMENT AND SETTING

7-19

(Inch)

(Metric)

(Inch)

(Metric)

(Inch)

(Metric)

(Inch)

(Metric)

Press the

▼

▲

key to select the desired copy contrast.

A larger value indicates a darker exposure level.

Press the OK key.

Press the

▼

▲

key to select “Back to copy default”.

Press the OK key. The machine will return to the copy default
setting screen.

Standard drawer

Press the

▼

▲

key to select the desired paper source.

Press the OK key. The machine will return to the copy default
setting screen.

Auto select set

Press the

▼

▲

key to select the desired copy mode.

Press the OK key. The machine will return to the copy default
setting screen.

AMS mode

To set the AMS mode as the default setting, press the

▼

▲

key to select “ON”.

If this item is set to “OFF”, the default setting will be the
preset magnification ratio.

Press the OK key. The machine will return to the copy default
setting screen.

Summary of Contents for CX 8682







































































































Search results

Summary of Contents for CX 8682

Reviews:

Related manuals for CX 8682

Brands by name

Popular brands

Triumph Adler CX 8682, Instruction Handbook Manual

Search results

Summary of Contents for CX 8682

Reviews:

Related manuals for CX 8682

Brands by name

Popular brands