Triumph Adler CX 8682 Instruction Handbook Manual Download Page 73

Page: 73 / 102

CHAPTER 7 MANAGEMENT AND SETTING

7-15

(Inch)

(Metric)

(Inch)

(Metric)

(Inch)

(Metric)

(Inch)

(Metric)

Press the

▼

▲

key to select “Back to machine default”.

Press the OK key. The machine will return to the machine
default setting screen.

Custom paper adj.

Press the

▼

▲

key to select a paper material.

Press the OK key.

Press the

▼

▲

key to select the fixing temperature based

on each paper material.

Press the OK key.

Press the

▼

▲

, and

keys to set the copy size. For the

method of setting, see “

Copy size adjustment” on page 7-

Press the OK key. The machine will return to the machine
default setting screen.

Standard size set

Press the

▼

▲

key to select the type of standard size.

For an inch machine, select “architecture” or “engineer”. For
a metric machine, select “A sizes” or “B sizes”.

Press the OK key. The machine will return to the machine
default setting screen.

Auto roll over

To enable auto roll change, press the

▼

▲

key to select

“ON”.

Press the OK key. The machine will return to the machine
default setting screen.

Summary of Contents for CX 8682







































































































Search results

Summary of Contents for CX 8682

Reviews:

Related manuals for CX 8682

Brands by name

Popular brands

Triumph Adler CX 8682, Instruction Handbook Manual

Search results

Summary of Contents for CX 8682

Reviews:

Related manuals for CX 8682

Brands by name

Popular brands