Electric shower
17
CLEANING
Triton recommends that all products are cleaned
using warm, soapy water.
DO NOT use abrasive or aggressive chemical
cleaning products as this may affect the product
surface finish and invalidate your guarantee.
WARNING!
DO NOT use abrasive or aggressive
cleaning products when cleaning the
shower as they may damage the unit.
CLEANING THE INLET FILTER
It is recommended that the filter is periodically
cleaned in order to maintain the performance of
the shower. It is essential that this operation is
carried out by an installer or service engineer.
IMPORTANT:
Before servicing, switch off both
the electricity supply and water supply at the
mains.
The inlet filter is situated at the bottom of the
inlet pipe
(fig.26)
.
To gain access to the filter, remove the trimplate
and then unscrew the retaining nut from the
bottom of the inlet pipe.
When cleaning the filter, DO NOT use a sharp
object, as it will cause damage. It is preferable to
use an old toothbrush or similar.
Filter and
‘O’ ring
Incoming
pipework
Fig.24
INSTRUCTIONS FOR INSTALLERS AND SERVICE ENGINEERS ONLY
