Electric shower
14
OPERATING THE SHOWER
To start the shower
Rotate the power selector to the red or blue
symbols and water will start to flow.
To stop the shower
Rotate the power selector to the ‘STOP’ position
and water will cease to flow.
To use the power selector
The power selector has four positions – STOP,
COLD, ECONOMY and HIGH
(fig.23)
.
The blue symbol is for COLD water only.
Adjusting the temperature control at this setting
will only change the force of the water from
the showerhead – it will not alter the water
temperature.
The red symbol is the ECONOMY setting for
using less energy when the ambient mains water
temperature is high during warmer months. To
adjust the temperature at this setting use the
temperature control.
Note:
If the stated flow rate required for the unit
cannot be met due to low water pressure, it will
be necessary to operate the unit on this setting
during the warmer months because of flow rate
limitations entering the unit.
WARNING!
Before normal operation of the
shower, it is essential that the
commissioning procedure has been
completed correctly.
WARNING!
If restarting immediately after
stopping, be aware that a slug of hot
water will be expelled for the first
few seconds.
Power selector
Cold
Economy
High
Temperature
control
Off
Fig.22
