Power on
indicator
17
Aspirante pumped electric
To decrease the shower temperature
Turn the temperature control anti-clockwise
towards the lower numbers; this will increase
the water flow.
To increase the shower temperature
Turn the temperature control clockwise towards
the higher numbers; this will decrease the water
flow.
Note:
It is advisable to be certain that the
showering temperature is satisfactory by testing
with your hand before stepping under the
sprayhead.
There will always be a time delay of a few
seconds between selecting a flow rate and the
water reaching the stable temperature for that
flow rate.
CAUTION:
It is recommended that persons
who may have difficulty understanding or
operating the shower controls should not be
left unattended while showering. Special
consideration should be given to young
children and the less able bodied.
OPERATING FUNCTIONS
Power on indicator (fig.36)
The power neon will light when the Start/Stop
button is pressed. This indicates that power is
on to the pump and power selector.
Low water pressure cut-out
Should the water pressure fall below the
minimum required to operate the shower,
power will be switched off to the heating
elements preventing any maintained
temperature rises.
Overheat cut-out
During normal operation if an overheat
temperature is sensed, power to the elements
will be reduced. Water will continue to flow.
When the temperature has cooled enough
power to the elements will be automatically
restored to the previous setting at the time of
interruption.
Fig.36
Note:
In normal use, it is in order to leave the
water supply permanently on to the shower
unit, but as with most electrical appliances,
the unit must be switched off at the
isolating switch when not in use.