OPTIONAL LOCAL
MONITOR
B126-2A1 LOCAL
TRANSMITTER
B126-2A1 REMOTE
RECEIVER
B126-110 REMOTE
REPEATER
B126-110 REMOTE
REPEATER
B126-110 REMOTE
REPEATER
Up to 175 ft. at 1080i (60Hz)
Up to 125 ft. at 1080p (60Hz)
Up to 175 ft. at 1080i (60Hz)
Up to 125 ft. at 1080p (60Hz)
BLU-RAY
Up to 175 ft. at 1080i (60Hz)
Up to 125 ft. at 1080p (60Hz)
Up to 175 ft. at 1080i (60Hz)
Up to 125 ft. at 1080p (60Hz)
MONITOR 1 MONITOR 2
7
1 x 2 Extender Kit with
Remote/Repeater Installation
Notes:
1. Test to make sure that the entire installation works properly before
running cables through ceilings/walls.
2. The diagram below shows the maximum extension distance when using
either Cat5e or Cat6 cabling. 24 AWG, solid wire Cat5e/6 cable, such
as Tripp Lite’s N202-Series, is required to achieve maximum distance
and resolution.
3. The B126-2A1 is set to transmit a stereo audio signal by default.
Press the Audio button on the transmitter unit to switch to 7.1-channel
surround sound audio. (7.1-channel surround sound signal will be
Multi-Channel or PCM)
1
Make sure all devices being connected are powered OFF.
2
Connect the HDMI source to the
INPUT
port on the transmitter unit
using a Tripp Lite P568-Series High-Speed HDMI Cable.
3
Optional:
Connect a monitor to the
LOCAL
port on the transmitter
unit using a Tripp Lite P568-Series High-Speed HDMI Cable.
13-08-043 93-32D0.indd 7
8/28/2013 2:17:39 PM
