background image

1111 W. 35th Street, Chicago, IL 60609 USA 

www.tripplite.com/support

13-08-043 • 9332D0_RevA

FCC Notice, Class B

This  device  complies  with  part  15  of  the  FCC  Rules.  Operation  is  subject  to  the  following  two 

conditions: (1) This device may not cause harmful interference, and (2) this device must accept 

any interference received, including interference that may cause undesired operation.

Note:

 This equipment has been tested and found to comply with the limits for a Class B digital 

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable 

protection  against  harmful  interference  in  a  residential  installation.  This  equipment  generates, 
uses and can radiate radio frequency energy and, if not installed and used in accordance with 

the instructions, may cause harmful interference to radio communications. However, there is no 

guarantee that interference will not occur in a particular installation. If this equipment does cause 

harmful interference to radio or television reception, which can be determined by turning the 

equipment off and on, the user is encouraged to try to correct the interference by one or more of 
the following measures:
•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is 

connected.

•  Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications to this equipment not expressly approved by Tripp Lite could void the 
user’s authority to operate this equipment.

WARNING

Use of this equipment in life support applications where failure of this equipment can reasonably 
be expected to cause the failure of the life support equipment or to significantly affect its safety 

or effectiveness is not recommended. Do not use this equipment in the presence of a flammable 
anesthetic mixture with air, oxygen or nitrous oxide.
Tripp Lite follows a policy of continuous improvement. Product specifications are subject to change 

without notice.

13-08-043 93-32D0.indd   20

8/28/2013   2:17:42 PM

Summary of Contents for B126-2A0





















Reviews: