19
Triplett Model 9310-A
7.7.2 Battery Replacement
Remove the 9V battery and replace it with a fresh one.
7.7.3 Battery Cover Installation
Re-install the battery being careful not to pinch any wires. Snap the Battery
Cover back into place and reinstall the Battery Cover Screw.
WARNING!!!
Do not use the meter when the low battery annunciator
+
_
is displayed.
This may cause the meter to produce inaccurate readings, and lead the
user to believe that no hazard exists, when, in fact, dangerous voltages
or currents are present.
WARNING!!!
The meter may not show the presence of dangerous potentials when D-HOLD
is activated. For example, if D-HOLD is applied when the meter is reading
zero, and 120VAC is subsequently applied, the meter will continue to
read zero. Failure to observe this precaution may result in damage
to the meter or injury to the user.
Summary of Contents for 9310-A
Page 35: ...35 Triplett Model 9310 A NOTES...
