14
Triplett Model 9310-A
11) D. HOLD / LIGHT Button –
Holds the reading in the display when the D-HOLD
button is pressed and released.
appears in the display to indicate that the
D.HOLD is activated. To release, press the D.HOLD Button again. To turn on
the LCD backlight, press and hold the button for 2 seconds or longer. To turn
the backlight off, again press and hold the button for 2 seconds or longer.
12) Hand Guard –
Grasp meter below this guard. Do not touch any bare
conductors that the jaws may be clamped around.
13) Clamp (Jaws) –
Opens 1.25” (32MM) to enclose conductor(s).
FIGURE 2
DISPLAY DETAILS
Refer to Figure 2 to identify the various display annunciators.
AUTO
The
Auto (ranging)
annunciator is on when the meter is set to a
function that has multiple ranges available. In most of these functions,
the user can manually change the ranges by pressing the SELECT
button. In the Capacitance
mode, the
Auto
annunciator is on, but
the ranges are not user selectable.
The
AC
~
annunciator is on when the meter is set to measure AC
voltage or current.
Negative Sign Annunciator –
This annunciator is displayed when DC
voltage is measured by the
V
Ω
Hz
jack is negative with respect to the
COM jack. It can also be displayed in the
A
mode, when the
measured current is reversed to the direction of the polarity arrow.
Note: Polarity arrow indicates current flow from positive to negative.
Summary of Contents for 9310-A
Page 35: ...35 Triplett Model 9310 A NOTES...
