TRIO TeST & MeaSUReMeNT
33
Copyright 2015 all rights reserved
Test Type
0
=
Earthed Appliance
1
=
Double Insulated
2
=
Leads
3
=
Class 1 250V
4
=
Class 2 250V
5
=
Class 1 Run Test
6
=
Class 2 Run Test
7
=
Earth only test
8
=
MIMS Run Test
9
=
EPOD 250V
10
=
10mA Portable RCD
11
=
30mA Portable RCD
12
=
10mA Fixed RCD
13
=
30mA Fixed RCD
14
=
PIEZO Run Test
15
=
3 pin Class II Run
16
=
Long Class I Run
17
=
3 Phase run test
uploading data to the PC
To transfer data from the
SafeTcheck
to a PC, each STC is
shipped with a PC DownLoader utility. This utility enables
data transfer from the memory of the
SafeTcheck
to a PC
via a USB cable. Instructions relating to the installation and
operation of the STC Downloader Program are supplied with
the
SafeTcheck
CD.
Records stored in the
SafeTcheck
are uploaded to the
memory of a PC by Selecting
Upload Test Results
under the
Utilities Menu. The Downloader utility must be running on the
PC during this process.
Records stored in the
SafeTcheck
can only be deleted on
mass by the user (see Utilities Menu).
The file format is a simple comma delimited (CSV) file.
This format is able to be imported in to most applications
including Microsoft Excel®.
Stored test records should be uploaded to a PC at the end
of each testing session or at regular intervals.
Note:
The USB cable is supplied together with the
Scanner, keyboard and/or Memory Upgrade
.
Keyboard
The
SafeTcheck
has been designed to work with a
standard flexible keyboard. The keyboard can be used in
parallel with a Scanner.
Note 1:
While the
SafeTcheck
has been tested with a
range of Keyboards, TRIO Test & Measurement can not
guarantee that all makes of keyboards will function with
the
SafeTcheck
.
Note 2:
When using the scanner together with the
keyboard, connect the keyboard to the scanner’s
“Keyboard Wedge Cable” via the PS/2 connection
Connecting the keyboard and scanner via separate
USB ports will occasionally cause the keyboard to send
spurious characters to the
SafeTcheck
while scanning
barcodes.
Scanner
The
SafeTcheck
has been designed to work with a
customised PS2 Barcode Scanner. The scanner can work in
parallel with a the flexible keyboard (see Note 2 above).
Should the Scanner’s settings be lost for any reason see
section entitled “Scanner Setup”.
The Scanner supplied as an accessory to the
SafeTcheck
may be used in one of two modes: with or without an “Enter”
as a terminator.
See Section "Scanner Setup" to program the scanners.
Data Logger operating instructions
