www.energyabsorption.com
Revision B June 2013
www.highwayguardrail.com
36
All rights in copyright reserved
6) Assemble
Cartridges
Remove one end of each alignment cable from the TMA and set aside to clear the top
side of each bay. Using a forklift and sling, place Cartridge B in position and secure it
using the flat washers, lock washers and nuts provided. Torque the nuts to 120±7 N-m
[90 ± 5 ft-lb] Repeat procedure for Cartridge A (See Figure 34).
7)
Assemble the Top Release Cables across the Arm Assemblies
Assemble the Top Release Cable across the Arm Assemblies (See Figure 36). Torque
the nuts
to 34 N-m [25 ft-lb], making
sure that roughly an equal amount of threads
protrude from nuts on both ends of cable. Lock cable in place using remaining fasteners
as "jam" nuts.
Figure 34
