Revision C August 2014
www.trinityhighway.com
13
All rights in copyright reserved
Connection Panel Types
If a system is placed in a location where traffic will be approaching from the rear of the system,
a Connection Panel is necessary. Figures 6, 7, 8, and 9 show the standard panel types. There
are variations for each panel type. The specific panel needed will depend on system and site
conditions. Therefore, it is important to send site specific data to the Customer Service
Department for a recommendation for exact panel needed for your application.
Figure 8
Quad-Beam to W-Beam Connection Panel
Figure 9
Quad-Beam End Shoe
Connection Panel*
Figure 6
Quad-Beam in Safety Shape Barrier
Connection Panel
Figure 7
Quad-Beam to Thrie-Beam
Connection Panel
*
Note:
Wheel Deflectors may
be required for this application.
