Revision C August 2014
www.trinityhighway.com
24
All rights in copyright reserved
Be sure Mushroom Washer lays flat against the Fender Panel (see Figure 29). Standoff on
Washer must be seated completely through slot.
Caution:
Do not mix the 5/8” hex nuts (small) with the 5/8” rail nuts (large). The
rail nuts are oversize (see Figure 31).
9) Attach Fender Panels (Wide Systems)
Note
:
For proper impact performance, systems for wide roadside features must have
Hinge Plates.
Attach Hinge Plates on each Fender Panel as shown in Figure 32.
Figure 29
Mushroom Washer Orientation
Figure 30
Fender Panel Gap for Narrow Systems
Figure 32
Fender Panel Assembly for Wide Systems
Figure 31
Rail Nuts are Oversize
