Revision C August 2014
www.trinityhighway.com
4
All rights in copyright reserved
This product has been specified for use by the appropriate highway authority and has been
provided to that user who has unique knowledge of how this system is to be assembled. No
person should be permitted to assist in the assembly, maintenance, or repair of this system that
does not possess the unique knowledge described above. These instructions are intended for
an individual qualified to both read and accurately interpret them as written. These instructions
are intended only for an individual experienced and skilled in the assembly of highway products
that are specified and selected by the highway authority.
A set of product drawings are available from Trinity Highway International upon request. Such
drawings should be reviewed and studied thoroughly by a qualified individual who is skilled in
interpreting them before the start of any product assembly.
Important:
Read safety instructions thoroughly and follow the suggested safe
practices before assembling, maintaining, or repairing the QuadGuard
®
CEN.
Failure to follow this warning can result in serious injury or death to the worker
and/or bystanders. Please keep up-to-date instructions available for later use and
reference by anyone involved in the assembly of this product.
Warning:
Ensure that all of the QuadGuard
®
CEN system Danger, Warning,
Caution, and Important statements within the QuadGuard
®
CEN Manual are
followed completely.
Recommended Safety Rules for Assembly
* Important Safety Instructions *
This Manual must be kept in a location where it is readily available to persons who assemble,
maintain, or repair the QuadGuard
®
CEN. Additional copies of this Manual and the Product
Description Manual are immediately available from Trinity Highway International by c1
(214) 589-8140 or by email at [email protected]. Please contact Trinity Highway
International if you have any questions concerning the information in this Manual or about the
QuadGuard
®
CEN. This Manual may also be downloaded directly from the website listed in the
Customer Service Contact section (see p. 3).
Always use appropriate safety precautions when operating power equipment, mixing chemicals,
and when moving heavy equipment or the QuadGuard
®
CEN components. Work gloves, apron,
safety goggles, safety-toe shoes, and back protection shall be used.
Safety measures incorporating traffic control devices specified by the highway authority must be
used to provide safety for personnel while at the assembly, maintenance, or repair site.
