33
Transfer project
After scanning the QR code, the settings stored on the QR code are
transferred to the device. The name of the settings is displayed in green
letters
DALI ECG programming
With a DT6 variant of the controller, the DALI ECGs (electronic control
gear units) must be assigned. This is done via the "Dali ECG" setting
option. Tap the magnifying glass icon to open the setting option.
Note:
If
more than three ECGs (electronic control gear units)
are installed
in a luminaire, a search run must also be started and an assignment
must be carried out.
Password for DALI
Tapping the magnifying glass icon displays a pop-up window in which
the password ("1995") for DALI must be entered. Tap the tick to confirm
the password entry.
COMMISSIONING
Summary of Contents for LiveLink LightGrid
Page 1: ...LIVELINK LIGHTGRID...
