35
Radio button overview
In the radio button overview, up to four fourfold radio buttons can be
integrated by scanning a QR code. Tapping the QR code icon opens the
camera for scanning.
Note:
The four radio buttons are automatically assigned preset functions af-
ter scanning (see: Radio button overview – after scanning).
COMMISSIONING
Scan radio button
To integrate a radio button, the QR code on the push-button must be
scanned. The lower area shows where the QR code is located on the
push-button.
Radio button overview – after scanning
After scanning a Radio button, the following parameters are displayed:
• Radio push button ID
• Button upper left (fourfold push-button only)
• Button bottom left (fourfold push-button only)
• Button upper right
• Button bottom right
The automatically preset functions can be edited by tapping the pencil
icon. If necessary, the radio button can be removed by tapping the trash
can icon.
Note:
Further setting options for radio buttons are listed in a table in the ap-
pendix.
Summary of Contents for LiveLink LightGrid
Page 1: ...LIVELINK LIGHTGRID...
