25
Set clock
Tap the setting option "Set clock" to individually set the time.
Note:
After selecting the setting option "Set clock" for the first time, your
agreement will be requested once for use of the location (GPS). This is
necessary to determine the HCL-curve suitable for the location.
Set local time
Select "Use my location" to enable the app to use the current location.
This is additionally displayed visually on a map. Tap the tick to confirm
the selection.
Settings
Tap the "Settings" option to set luminaire-specific parameters.
Settings – Luceo and Bicult
In the "Settings" area, the following parameters can be managed for
Luceo and Bicult luminaires:
• Status after Power ON
• MDT (motion detector) mode
• Indirect MDT (motion detector) sensitivity
• Direct MDT (motion detector) sensitivity
• Direct MDT (motion detector) switch-off time in minutes
• Light detector
COMMISSIONING
Summary of Contents for LiveLink LightGrid
Page 1: ...LIVELINK LIGHTGRID...