26
Settings – Cultega
In the "Settings" area, only the following parameters can be managed
for Cultega luminaires due to lack of sensors:
• Status after Power ON
• MDT (motion detector) mode
• Direct MDT (motion detector) switch-off time in minutes
Note:
The motion detector settings refer to the sensor values of the control-
ler.
Settings – Controller
In the "Settings" area, the following parameters can be managed for
the LightGrid Controller:
• 230V push-button input 1
• 230V push-button input 2
• Status after Power ON
• MDT (motion detector) mode
• Indirect MDT (motion detector) sensitivity
• Indirect MDT (motion detector) switch-off time in minutes
• Direct MDT (motion detector) sensitivity
• Direct MDT (motion detector) switch-off time in minutes
• Light detector
Settings
The following section explains the parameters of the settings in more
detail.
Note:
The following screenshots show the factory settings for the individual
parameters.
COMMISSIONING
Summary of Contents for LiveLink LightGrid
Page 1: ...LIVELINK LIGHTGRID...