38
RESET factory settings
Tap the "RESET factory settings" setting option to reset the connected
device to delivery state. This does not include the device password.
Reset luminaire to factory settings
By tapping the tick, the connected device can be reset to the factory
settings. Tapping the cross cancels the process.
COMMISSIONING
Network
Tap the "Network" settings option to manage the network settings. To
open the network settings, the password “5678” must be entered.
Network settings
The following parameters can be set in the network settings area:
• Mesh network
• Room network name
• Group
• Repeater
• Swarm mode
• Swarm MDT (motion detector) switch-off time
• Swarm HCL-curve calculation
• Swarm HCL-curve type
• HCL-curve used by swarm
• Gateway indirect MDT (motion detector) instance (2 min) – cur-
rently not supported
• Gateway direct MDT (motion detector) instance (2 min) – currently
not supported
Summary of Contents for LiveLink LightGrid
Page 1: ...LIVELINK LIGHTGRID...
