www.trilithic.com
www.trilithic.com
Page 44
8310 RSA Operation Manual
Return Sweep Analyzer
Network Settings
Perform the following actions to setup the network settings of the 8310 RSA.
• Network Setup DHCP
– Select
Disable
to manually set the network settings of
the 8310 RSA or select
Enable
to automatically obtain the network settings from a
DHCP server.
The 8310 RSA must be rebooted before the DHCP selection
will be used.
If DHCP is enabled, the values shown for the IP Address,
Subnet, Gateway, & DNS are automatically assigned by the
DHCP server and cannot be changed.
After rebooting the 8310 RSA, and if the IP address of the 8310
RSA is changed, you will need to enter the new IP Address
into the web browser to access the Web Interface.
• IP
– Enter the IP address of the 8310 RSA into this field.
• SN
– Enter the Subnet of the 8310 RSA into this field.
• GW
– Enter the Gateway of the 8310 RSA into this field.
• DNS1
– Enter the Primary DNS address of the 8310 RSA into this field.
• DNS2
– Enter the Secondary DNS address of the 8310 RSA into this field.
