www.trilithic.com
www.trilithic.com
Page 17
8310 RSA Operation Manual
Return Sweep Analyzer
Fan Intake Holes
Fan Exhaust Holes
Installing the 8310 RSA
The following section explains the procedure used to physically install the 8310 RSA. In order
to properly setup the 8310 RSA the following steps must be completed in this order. Do not
skip any steps.
Make sure the fan intake holes on the left of the 8310 RSA
and the fan exhaust holes on the right of the 8310 RSA remain
unblocked.
DO NOT plug in the 8310 RSA’s power cord until instructed
below.
If the display screen is not illuminated upon connecting power
to the 8310 RSA, call Trilithic Application Support at
1-800-344-2412 for assistance.
1. Mount the 8310 RSA in a standard rack using four retaining screws.
2.
Plug the 8310 RSA’s power cord into the 100-240 VAC Power Connection and then into
an AC power source. When power is supplied to 8310 RSA, the screen on the front of
the 8310 RSA is illuminated.
