manualshive.com logo in svg

Trilithic 8310 RSA, Operation Manual

Share
Download
Trilithic 8310 RSA Operation Manual Download Page 35

www.trilithic.com

www.trilithic.com

Page 35

8310 RSA Operation Manual

Return Sweep Analyzer

DHCP must be enabled and the 8310 RSA must be rebooted 

before the IP SETUP - DHCP menu will be displayed. The 

values shown are automatically assigned by the DHCP server 

and cannot be changed.

Take note of the IP address, it is necessary to remotely 

connect to the 8310 RSA through a web browser.

Viewing Automatically Assigned DHCP Network Settings

To view the IP address, subnet mask, gateway, 

DNS-1 & DNS-2 that has been assigned by the 

DHCP servier, perform the following steps:

1.  From the 

NETWORK MENU

, use the 

arrow buttons to highlight 

IP SETUP,

 and 

then select the 

Enter

 button.

2.  The 

IP SETUP - DHCP

 menu will be 

displayed. The 

IP, SN, GW, DNS1

, 

and 

DNS2

 fields will display the values 

assigned by the DHCP server.

3.  To return to the 

NETWORK MENU

, select 

the 

Enter

 button.

Summary of Contents for 8310 RSA





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands