www.trilithic.com
www.trilithic.com
Page 34
8310 RSA Operation Manual
Return Sweep Analyzer
If DHCP has been enabled and the 8310 RSA has been
rebooted, the 8310 RSA will display the IP SETUP - DHCP
menu for viewing purposes only. The values shown in that
menu are assigned by the DHCP server and cannot be
changed.
Network settings do not take effect until the 8310 RSA has
been rebooted. Take note of the IP address, it is necessary to
remotely connect to the 8310 RSA through a web browser.
2. The
NETWORK SETUP
menu will be
displayed, use the arrow buttons to
highlight the
IP, SN, GW, DNS1
, or
DNS2
value fields, and then select the
Enter
button to edit the value.
3. Use the up/down arrow buttons to adjust
the value of the selected digit, and then
use the left/right arrow buttons to change
between the digits. Once you have
finished editing the value, select the
Enter
button to accept your changes.
4.
Once you have made all of the network
changes, use the arrow buttons to
highlight
OK,
and then select the
Enter
button to save the network settings.
