www.trilithic.com
www.trilithic.com
Page 43
8310 RSA Operation Manual
Return Sweep Analyzer
• Mouse Select
– Select from either
Add to Plan
or
Del from Plan
. Then, the mouse
can be used to either add or delete frequencies from the sweep. Hover over the
sweep graph with the mouse over the area to add or delete. Then, left click and hold
the mouse button while moving the mouse to highlight the area to add or delete.
Finally, release the mouse button to add or delete the frequencies.
• Copy / Merge
– Select the dropdown box below the
Select
button to choose the
channel plan to copy or merge and then select the
Copy
or
Merge
button to either
copy or merge the settings of the currently displayed plans to the selected plan.
• Manual Entry
– To manually select the frequencies for the sweep, enter the
following information and then select the
Add
or
Del
button to add or delete the
selected frequencies:
• Start Frequency
– Enter the Start Frequency into this field.
• Start Frequency
– Enter the Stop Frequency into this field.
• Step Frequency
– Enter the Frequency Step into this field.
• Sweep Frequencies
– To view the sweep frequencies that are included or excluded,
select either the
Included
or
Excluded
option. The list shown below will update
to show the included or excluded frequencies. To delete an included or excluded
frequency, use the mouse to select the frequency and then select the
Del Selection
button.
• Send Sweep Plan to the RSA
– After changing any of the channel plan settings,
select this button to send the settings to the device. The new sweep settings will not
take affect until they are sent to the device.
• Return to RSA Setup
– To return to the RSA setup screen, select this button. You
must first send the channel plan to the device if any changes have been made.
Otherwise any changes that have been made will be lost.
When finished updating or viewing the settings, reboot the
8310 RSA before closing your browser.
