4-16
4-16
4-16
4-16
4-16
Using the SETUP Program
Anti-Virus
If this icon is set to Enabled, the following warning message will appear when any
program or virus issues the FORMAT, DISKCOPY, or SYS commands or attempts
to write to the boot sector of the hard disk drive. You may have to type N several
times to prevent the boot sector write. The settings are Enabled and Disabled.
Boot Sector Write!!!
Possible VIRUS: Continue (Y/N)?
At this time, if you want to complete the running of the program regardless of the
message above, press Y. If you see the message above in spite of having not run
programs described above, any virus may attempt to write to the boot sector. Select N
to prevent the virus from writing to the boot sector.
Notice that if you want to install MS-DOS, Windows 95, Windows NT, or OS/2, you
should set this option to Disabled.
Default
The Default menu has 2 icons that allow you to select a group of settings for all
System Setup options. You can use these icons to quickly set system configuration
parameters and you can select a group of settings when the system has configuration-
related problems. Each System Setup option has 2 default settings: original and
optimal. These settings are applied to all System Setup options.
Original
Selecting the Original icon returns to the system configuration values present in
SETUP when you first started this SETUP session. When you see the message
"Restore old values?", select Yes to restore the settings.
Optimal
This icon allows you to load the optimal default settings for the BIOS. The Optimal
default settings are best values to optimize system performance. If NVRAM (Non-
Volatile Random Access Memory) is corrupted, the Optimal settings are loaded
automatically. When you see the message "Load optimal values?", select Yes to load
optimal values.
