4-8
4-8
4-8
4-8
4-8
Using the SETUP Program
VGA Frequency
This option sets the VGA frequency when the built-in VGA adapter is enabled. It is
only available when the On Chip VGA option is enabled. The settings are 40MHz,
45MHz, 50MHz, 55MHz, 60MHz, 65MHz, and 70MHz.
Floppy Access Control
This option sets read/write access for the diskette drive. The settings are Normal and
Read Only. Normal means read/write access for drives.
If you select Read Only for this option, you can read a diskette and copy data from it,
but you cannot store new data on it or delete any files it contains.
Power Control Setup
If you select the Power Ctrl icon from the Setup main menu, the Power Control Setup
menu is displayed.
Power Management / APM
Set the option to Enabled to enable the power management and APM (Advanced
Power Management) features. Only when this option is set to Enabled, you can use
all options in the Power Control Setup menu. The settings are Disabled and Enabled.
Green PC Monitor Power State
This option specifies the power state that the green PC-compliant video monitor
enters when BIOS places it in a power saving state after the specified period of
display inactivity has expired. The settings are Standby, Suspend, and Off.
Video Power Down Mode
This option specifies the power conserving state that the DPMS (Display Power
Management Signaling) compliant video subsystem enters after the specified period
of display inactivity has expired. The settings are Disabled, Standby, and Suspend.
Standby Time Out (Minute)
This option specifies the length of the period of system inactivity while in full power
on state for going into standby state. When the specified period expires, the computer
enters standby state. The settings are Disabled, 5Min, 10Min, 15Min, 20Min, 25Min,
and 30Min.
