Trienergia S.r.l.
Strada Pavesa, 13/A
Bondeno di Gonzaga
(MN) 46023
Italy
VAT No. 02470010204
+39 (0)376 595052
8
Assembly using the module clamps on the long side
Photovoltaic modules must be fixed using the appropriate clamps. To do this,
use four terminal clamps for each photovoltaic module. If several modules are
installed one after the other, use the intermediate clamps between modules. Fix
the appropriate clamps for photovoltaic modules, following the measurements
A and B specified in the chart below. The following figure, which represents the
fixing clamp, is for demonstration purposes only. Therefore, other types of
clamps can also be used, but they shall comply with the following dimensions.
Min. width of A Clamp 70mm
Min. depth of B terminal 10mm