Trienergia S.r.l.
Strada Pavesa, 13/A
Bondeno di Gonzaga
(MN) 46023
Italy
VAT No. 02470010204
+39 (0)376 595052
7
Mechanical installation
The TRIxxxBC-xB photovoltaic modules are designed for a maximum test load of
3.600 Pa (including a safety factor of 1,5) when installed on a mounting system
designed for this type of load. Make sure that the wind and snow load do not
exceed this limit at the installation site. In case of roof mounting, make sure that
it is able to support the load of the photovoltaic system. Assemble the
photovoltaic modules according to the procedures described below. The
photovoltaic modules can be fixed to the mounting system using the
appropriate clamps. The TRIxxxBC-xB photovoltaic modules can be mounted at
any angle.
Choose the orientation of the modules to ensure maximum exposure to the sun.
The ideal exposure is towards the south in the northern hemisphere and
towards the north in the southern hemisphere. In Central Europe the inclination
should be around 30 °, while in Southern Europe it should be slightly lower. The
inclination should preferably be not less than 10 ° - 15 ° because the self-
cleaning function of the surface of the modules would be compromised.
Make sure that the modules are not covered by shadows due to the presence of
antennas, chimneys, trees or other similar elements.