Trienergia S.r.l.
Strada Pavesa, 13/A
Bondeno di Gonzaga
(MN) 46023
Italy
VAT No. 02470010204
+39 (0)376 595052
6
Warnings related to the installation of the
photovoltaic modules
The safety instructions and mandatory directives listed below must be observed:
Assembly and installation must only be carried out by qualified personnel, in
compliance with local directives;
Handle the photovoltaic modules with particular care;
Do not use damaged photovoltaic modules;
Pay particular attention when transporting the photovoltaic module. Be
careful not to drop the module and avoid excessive loads. The solar cells in the
module are very thin and naturally fragile;
Do not
step on the photovoltaic module
and prevent any object from falling
over it;
Do not damage or scratch the back of the photovoltaic module;
Do not hit any component of the photovoltaic module;
Do not lift the photovoltaic module by gripping the junction box or cables. Do
not pull, twist or scratch the cables;
Do not disassemble the photovoltaic module and do not make unauthorized
modifications. Do not remove any labels. Do not drill holes through the frame or
the glass because it would compromise the stability of the frame or the glass;
Do not cover the water drain holes in the module frame. Damages due to
freezing may occur if the frame is filled with water;
Make sure that the insulating coating of the frame is not scratched, in order
to avoid corrosion phenomena that may compromise the stability of the frame;
Make sure that the connectors are properly tightened and check the wiring
operation;
Only use devices, connectors, cables and mounting systems suitable for
photovoltaic systems:
After installation, check the correct operation of the photovoltaic module
and system.
