Version: TCM_0450_E80_M_EN_150209_E007
67
Manual Operation
The following submenus are available:
FREQ OUT
A freely settable frequency can be applied to the output
CTRL OUT
The output level can be set
mA-OUT
A freely settable current can be applied to the output
CTRL IN
The level currently applied to the input is indicated
mA-IN
The actual electric input current is indicated
(Only with option
“PRESSURE COMPENSATION”)
When the I/O-TEST menu is left, all outputs return to normal operation.
4.5.12.1.
FREQ OUT menu
In the submenu FREQ OUT a freely settable frequency, between 1 Hz and 9,999 Hz, can be applied to the
output.
I/O-TEST MENU
FREQ OUT
UP DOWN EXIT
P
ENTER FREQUENCY (Hz)
9.000
RIGHT UP EXIT
Use the keys
“RIGHT” and “UP” to select the desired value and confirm with “P” or skip with “EXIT”.
If
“P” was pressed the frequency is applied to the output and the display shows
CHANGE VALUE?
YES EXIT
Press
“YES” to enter a new value or “EXIT” to leave the menu.
If
“EXIT” is pressed, the display returns to the I/O-TEST menu.
4.5.12.2.
CTRL OUT Menu
In the submenu CTRL OUT a low or high level can be applied to the output.
I/O-TEST MENU
CTRL OUT
UP DOWN EXIT
P
SELECT OUTPUT
LEVEL !
HIGH LOW EXIT
Use the keys
“HIGH” and “LOW” to set the output value or leave the menu with “EXIT”.
If
“EXIT” is pressed, the display returns to the I/O-TEST menu.
4.5.12.3.
mA-OUT Menu
In the submenu mA-OUT a freely settable current, between 2 mA and 22 mA, can be applied to the output.
I/O-TEST MENU
mA-OUT
UP DOWN EXIT
P
ANALOG OUT TEST
mA-OUT I1
UP DOWN EXIT
Use the keys
“UP” and “DOWN” to select the desired output and confirm with “P” or skip with “EXIT”.
