Version: TCM_0450_E80_M_EN_150209_E007
54
Manual Operation
Is
“mA-IN I1” selected but the status of the analog input is “OFF”, the display shows
CHANGE mA-IN I2
TO PRESSURE
TO PROCEED
. OK
Confirm with
”OK“ and configure the analog input correspondingly, if required.
If
“MANUAL” is selected, the display shows
MANUAL PRESSURE RATE
0. 000
BAR
RIGHT UP EXIT
Use the keys
“RIGHT” and “UP” to select the desired value and confirm with “P” or skip with “EXIT”.
The display returns to the PRESS. COMP. menu.
4.5.6.7.
TOTAL COUNT Menu
In the submenu TOTAL COUNT the TOTAL counter can be configured.
The following operating modes are available:
DEFAULT:
The TOTAL count includes flow in positive as well as in negative direction. With positive flow the TOTAL value
increases, with negative flow it decreases.
FORWARD:
The TOTAL count includes only flow in positive direction. With negative flow the TOTAL value does not change.
BACKWARD:
The TOTAL count includes only flow in negative direction. With positive flow the TOTAL value does not change.
PARAMETER MENU
TOTAL COUNT
UP DOWN EXIT
P
SELECT TOTALIZER MODUS
DEFAULT
UP DOWN EXIT
Use the keys
“UP” and “DOWN” to select the mode and confirm with “P” or skip with “EXIT”.
The display returns to the SETUP PARAMETER menu.
4.5.6.8.
LANGUAGE Menu
In the submenu LANGUAGE the language used in the display can be selected.
For the time being, English and Russian can be selected.
PARAMETER MENU
LANGUAGE
UP DOWN EXIT
P
SELECT LANGUAGE
ENGLISH
UP DOWN EXIT
Use the keys
“UP” and “DOWN” to select the language and confirm with “P” or skip with “EXIT”.
The display returns to the SETUP PARAMETER menu.