L35 Series Install Guide
Page 4 of 20
TRIATEK® Lighting • 1025 Cobb Place Blvd. Suite 100 Kennesaw, GA 30144 • 800-241-9173 • www.triateklighting.com
11/30/2004
Due to continuous product improvement, TRIATEK Lighting reserves the right to change product specifi cations without notice.
Overview
This installation guide gives instructions on how to install TRIATEK® Lighting’s L35
Series Lighting Control Panel. The guide contains three major sections: Overview,
Installing the L35 Series, and Upgrading the L35 Series. The L35 Series comes in
four basic units based upon relay capacities: L3516, L3532, L3548 and the L3560.
Each unit may contain up to the number of relays indicated. Enclosure sizes for
each of the four units will vary. Refer to the L35 Series Data Sheet for more informa-
tion.
Figures 1a and 1b show the L3516 Series Lighting Control Panel. The unit includes
a painted steel enclosure with a overhanging plate and hinged door suitable for ei-
ther fl ush or surface mounting. Electronics include L35 Series Controller (LMB) with
on-board RS-485 communication, Relay Interface Module(s) (16 contactors each),
Ribbon cables, Relays, Power supply and Primary power fuse.
1) Power Supply and fuse
2) High Voltage Relays: L35 Series = 20 amp
3) High Voltage Sections
4) Controller
5) 16 Relay Interface Board
6) Low Voltage Section
7) Enclosure with Removable Front Plate
8) Hinged Door
9) High Voltage Barriers
10) Ribbon Cable Connection between CPU and Relay Interface
11) Door Lock
12) Relay and Switch Assignment Record
Introduction
Figure 1b
10
5
3
Figure 1a
1
2
4
9
Figure 1c
6
7
8
11
12
