30
No part of this document may be reproduced, stored in retrieval system or transmitted by
any means, electronic, mechanical, photocopying, recording or otherwise, without written
permission from Tri-Star Technologies.
be used in the Marker application.
Export
and
Import
allow working with regular .txt and/or
.csv file formats as described in chapter 9.8.
Commands
tab has options to add a new wire to the job, edit or delete the existing wires,
and configure the printing label.
Fig.9.2. File (assembly) and Wire Tabs.
•
Add Wire
adds a new wire into the wire grid and opens the wire edit window (Fig.9.2)
•
Edit Wire
opens the edit window for the wire highlighted in the wire grid.
•
Copy Wire
copies the selected wire to the end of the list.
•
Delete Wire
deletes the wire highlighted in the wire grid.
•
Delete Selected
deletes the wires highlighted in the wire grid.
•
Printer Config
opens label printer configuration for selected wire.
•
Run All
opens the run screen for all the wires in the current task.
•
Run Selected
opens the run screen for all the wires highlighted in the wire grid.
Wire Edit
Each single wire can be split into 3 independent segments with different lengths,
messages and gaps. The total length of the wire is determined by summing up the lengths of the
all segments. Click the checkbox under mark to print the message on the wire; otherwise the
machine pulls the segment without marking.
Fig.9.3. Wire editing window
