manualshive.com logo in svg

TRENDnet TWG-BRF114, User Manual, Page: 73 / 88

Share
Download
TRENDnet TWG-BRF114 User Manual Download Page 73

Advanced Administration 

PC Database 

The PC Database is used whenever you need to select a PC (e.g. for the "DMZ" PC). It eliminates the need to enter IP addresses. Also, 
you do not need to use fixed IP addresses on your LAN. 

PC Database Screen 

An example 

PC Database 

screen is shown below. 

 

Figure 43: PC Database  

•

 

PCs which are "DHCP Clients" are automatically added to the database, and updated as required. 

•

 

By default, non-Server versions of Windows act as "DHCP Clients"; this setting is called "Obtain an IP Address automatically". 

•

 

The Broadband Router uses the "Hardware Address" to identify each PC, not the name or IP address. The "Hardware Address" 
can only change if you change the PC's network card or adapter. 

•

 

This system means you do NOT need to use Fixed (static) IP addresses on your LAN. However, you can add PCs using Fixed 
(static) IP Addresses to the PC database if required. 

71 

Summary of Contents for TWG-BRF114

























































































Reviews:

No comments