Broadband Router User Guide
Checking TCP/IP Settings - Windows 9x/ME:
1.
Select
Control Panel - Network
. You should see a screen like the following:
Figure 9: Network Configuration
2.
Select the
TCP/IP
protocol for your network card.
3.
Click on the
Properties
button. You should then see a screen like the following.
Figure 10: IP Address (Win 95)
Ensure your TCP/IP settings are correct, as follows:
Using DHCP
To use DHCP, select the radio button
Obtain an IP Address automatically
. This is the default Windows setting.
Using this is recom-
mended
. By default, the Broadband Router will act as a DHCP Server.
Restart your PC to ensure it obtains an IP Address from the Broadband Router.
Using "Specify an IP Address"
If your PC is already configured, check with your network administrator before making the following changes:
•
On the
Gateway
tab, enter the Broadband Router's IP address in the
New Gateway
field and click
Add
, as shown below. Your
LAN administrator can advise you of the IP Address they assigned to the Broadband Router.
18
Summary of Contents for TWG-BRF114
