manualshive.com logo in svg

TRENDnet TWG-BRF114, User Manual, Page: 72 / 88

Share
Download
TRENDnet TWG-BRF114 User Manual Download Page 72

Broadband Router User Guide 

Options 

This screen allows advanced users to enter or change a number of settings. For normal operation, there is no need to use this screen or 
change any settings. 

An example 

Options

 screen is shown below.  

 

Figure 42: Options Screen 

Data - Options Screen 

Backup DNS 

IP Address 

Enter the IP Address of the DNS (Domain Name Servers) here. These 
DNS will be used only if the primary DNS is unavailable. 

UPnP 

Enable UPnP 
Services 

•

 

UPnP (Universal Plug and Play) allows automatic discovery and 
configuration of equipment attached to your LAN. UPnP is by 
supported Windows ME, XP, or later.  

•

 

If Enabled, this device will be visible via UPnP.  

•

 

If Disabled, this device will not be visible via UPnP.  

Allow Configu-
ration... 

•

 

If checked, then UPnP users can change the configuration.  

•

 

If Disabled, UPnP users can only view the configuration. 

Allow Internet 
access to be 
disabled 

•

 

If checked, then UPnP users can disable Internet access via this 
device.  

•

 

If Disabled, UPnP users can NOT disable Internet access via this 
device.  

70 

Summary of Contents for TWG-BRF114

























































































Reviews:

No comments