TRENDnet TS-D40G, User Manual

Page: 8 / 42

Page 4
LEDs (Front Panel)
There are five (5) status LEDs on the front panel, as follows:
Ready Normally ON.
This blinks during Startup or Shutdown, and turns OFF after the
shutdown is completed.
Error
(Amber) Normally OFF.
However, it will be On during the power-on self test. Once the
self-test is completed, it will turn OFF. If it stays ON, there is a
hardware error.
During a software upgrade, both the Ready and Error LEDs will
blink.
Disk Full Normally OFF.
Blinking indicates the disk is 98% full.
ON indicates the disk is completely full.
Disk Flashes during normal operation, when the Hard Disk is ac-
cessed.
LAN Flashes during normal operation, when data is transmitted or
received via the LAN.
Buzzer
The buzzer will beep as follows:
? ?
1 Beep - Reset button or power switch is pressed.
? ?
2 Beeps (Repeated every 5 seconds for 1 minute) - Disk Server is a DHCP client,
but no DHCP Server responded to the DHCP client request.
? ?
3 Beeps (Repeated every 15 seconds for 3 minutes) - Hard disk usage exceeds
98%.
? ?
5 Beeps (Repeated every 15 seconds for 3 minutes) - Overheating; automatic
shutdown will start 3minutes after 1
st
beep.
Specifications
Dimensions 210mm (W) * 271mm (D) * 66mm (H)
8" (W) * 11" (D) * 3" (H)
Operating
Temperature 5
?
C to 40
?
C
Storage
Temperature -10
?
C to 60
?
C