Page 25
Figure 11: IP Address (Win 95/98)
To act as a DHCP Client:
? ?
Click on the radio button to
Obtain an IP address automatically
, as shown
above. If the DHCP Server in the Disk Server has been enabled, it will now pro-
vide an IP Address and related data to your PC when it boots.
? ?
Restart your PC. (DHCP only functions when your PC starts.)
To use "Specify an IP address" (fixed IP Address):
? ?
If your PC is already configured, no changes are required.
? ?
If you just installed TCP/IP, you need to enter:
??
IP Address
and
Subnet mask
(on the
IP Address
tab, as shown above).
??
Default Gateway Address
(on the
Gateway
tab)
These values need to be compatible with other devices on your LAN. Each
PC requires a
unique
IP Address
(usually only the last field is different), and
the
same
Subnet Mask
. The
IP Address
range commonly used is 192.168.0.1
to 192.168.0.254, with a
Subnet Mask
of 255.255.255.0.
The
Gateway
is the IP Address of your Router or Internet Gateway. If you
don't have either of those, the address should be left at 0.0.0.0.
? ?
If you have made any changes, Restart your PC.
?
If you have a Router
on your LAN, ask
your LAN Administra-
tor what values to
use.
Summary of Contents for TS-D40G
Page 1: ...Disk Server User s Guide...
Page 2: ......
Page 36: ...Page 32 This page was deliberately left blank...
