TRENDnet TPE-30102WS, User Manual, Page: 87 / 112

© Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TPE-30102WS
83
4. Click Apply to apply the settings.
5. Click Save Settings to Flash (menu).
6. Click Save Settings to Flash (button), then click OK.
Note: This step saves all configuration changes to the NV-RAM to ensure that if the
switch is rebooted or power cycled, the configuration changes will still be applied.
PoE Power Delay
Power over Ethernet > PoE Configuration
PoE Power Delay will allow a delay for power to be delivered to the device after you
have plugged in the device to the switch.
1. Log into your switch management page (see “ Access your switch management page ”
on page 11).
2. Click on Power over Ethernet and click on Poe Power Delay.
3. Review the settings below and click apply the settings.

Delay: Select enable or disable to turn on or off the PoE Power Delay function.

Powering delay time: Input the length of time you wish to delay power being
delivered to your PoE device. You can input the range from 0 – 300 seconds)
4. Click Apply to apply the settings.
5. Click Save Settings to Flash (menu).
6. Click Save Settings to Flash (button), then click OK.
Note: This step saves all configuration changes to the NV-RAM to ensure that if the
switch is rebooted or power cycled, the configuration changes will still be applied.