TRENDnet TPE-30102WS, User Manual, Page: 75 / 112

© Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TPE-30102WS
71
port will be removed from the voice VLAN. The range is 1 to 120
hours.
o
CoS - This parameter is CoS priority level assigned to the voice data
packets received on each voice VLAN port. For the COS priority to be
effective, QoS must be Enabled.
Click Apply to save the settings.

In the table at the bottom of the page, the voice VLAN Auto- Detection status
is defined. From the Auto-Detection column, select one of the port rows and
then one of the following choices from the pull-down menu:
o
Ignore - This parameter indicates that the setting in the All row does
not apply to the Dynamic Vlan Status field. In other words, each port
is set individually.
o
Enable - The voice VLAN Auto-Detection feature is activated for the
port row selected.
o
Disable - The voice VLAN Auto-Detection feature is active for the port
row selected.
Note: The voice VLAN Auto-Detection feature can only be enabled on “Not Member”
ports of the voice VLAN. Member ports cannot have the voice VLAN Auto-Detection
feature enabled. The Status column displays Static for the member ports
4. Click Save Settings to Flash (menu).
5. Click Save Settings to Flash (button), then click OK.
Note: This step saves all configuration changes to the NV-RAM to ensure that if the
switch is rebooted or power cycled, the configuration changes will still be applied.
Configure Voice VLAN OUI settings
Voice VLAN > Voice VLAN OUI Settings
1. Log into your switch management page (see “ Access your switch management page ”
on page 11).
2. Click on Voice VLAN and click on Voice VLAN OUI Settings.
3. Review the settings.
Use the following procedure to configure voice VLAN OUIs:

Enter a text description that helps you identify the manufacturer’s OUI in the
User Defined OUI - Description field. This parameter can be up to 20 characters
in length.