TRENDnet TPE-30102WS, User Manual, Page: 25 / 112

© Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TPE-30102WS
21
.
4. Click Save Settings to Flash (menu).
5. Click Save Settings to Flash (button), then click OK.
Note: This step saves all configuration changes to the NV-RAM to ensure that if the
switch is rebooted or power cycled, the configuration changes will still be applied.
Enable or disable SNMP and modify idle timeout settings
System > User Interface
This section explains how to enable SNMP on the switch and modify the switch
management page idle timeout settings.
Note: If you disable the SNMP on the switch, the switch will not be manageable via
SNMP using MIBs.
1. Log into your switch management page (see “ Access your switch management page ”
on page 11).
2. Click on System, and click on User Interface.
3. Review the settings. Click Apply to save changes.

SNMP Agent: Click the drop-down list to one of the following options.
o
Enabled - When you enable this parameter, the SNMP agent is active.
You can manage the switch with SNMP network management
software and the switch’s private MIB.
o
Disabled - When you enable this parameter, the SNMP agent is
inactive.

Telnet Agent: Click the drop-down list to one of the following options
o
Enabled – When you enable this parameter, the Telnet agent is active.
You can manage the switch remotely with Telnet network
management.
o
Disabled – when you enable this parameter, the Telnet agent is
inactive.

SSH Agent: Click the drop-down list to one of the following options.
o
Enabled – When you enable this parameter, the SSH agent is active.
You can manage the switch with SSH-agent helper program and the
switches private MIB.
o
Disabled – when you enable this parameter, the SSH agent is inactive.

Web Server Status – Displays the current SNMP status.

Web Idle Timeout - Enter the idle period in minutes, when the switch will
automatically log out a user from the switch management page.