TRENDnet TPE-30102WS, User Manual, Page: 34 / 112

© Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TPE-30102WS
30

MST Table: Make changes to the table entry, and click Apply modify or click
Delete to remove the ID entry.
4. Click Save Settings to Flash (menu).
5. Click Save Settings to Flash (button), then click OK.
Note: This step saves all configuration changes to the NV-RAM to ensure that if the
switch is rebooted or power cycled, the configuration changes will still be applied.
View your Spanning Tree Protocol Instance Information (MSTP)
Bridge > Spanning Tree > Instance Information
1. Log into your switch management page (see “ Access your switch management page ”
on page 11).
2. Click on Bridge, click on Spanning Tree, and click on Instance Information.
3. View your MSTP instance information.

MSTI ID – Specifies the instance to which the VLAN is assigned.

Internal Root Cost – Specifies the intra-region cost to reach the CIST Regional
Root.

Root Port – Indicates the selected instance’s root port.

Regional Root Bridge – Displays the ID of the regional root bridge.

Designated Bridge – Displays the ID of the bridge that connects the link or
shared LAN to the root.

Instance Priority – Specifies the selected spanning tree instance device priority.
The field range is 0-61440. The field default is 32768.