TRENDnet TEG-S2620is, User Manual, Page: 47 / 124

the switch in stacking group, please use the Web GUI configuration interface.
¾
Disable:
The stacking function is not working.
¾
Master:
There must have a leader switch to control all other switches in
stacking group. You can only assign one switch to be the master switch
in one stacking group. When the stacking group is set up, the master
switch will control all switches in the stacking group.
¾
Slave:
besides the master switch, rest of the switches are called slave
switch in stacking group. When the stacking group is set up, you can
only configure the slave switches through the master switch.
Note:
1. Before configuring the stacking function, make sure all stack switches
are in the same network.
2. Configure stacking function; you must configure the master switch first.
3. After you have configured the stacking function, use Cat. 5 cable to
connect every switch in the stacking group.
4. To remove the switch from stacking group, you must remove the slave
switch first. When all slave switches are removed, you can remove the
master switch from stacking group.
Misc Configuration interface
41