TRENDnet TEG-S2620is, User Manual, Page: 32 / 124

5.
Speed/Duplex:
set the port link speed and duplex mode.
6.
FC:
enable or disable
Flow control
function (Flow control for full duplex link
mode).
7.
BP:
enable or disable
Back Pressure
function (Backpressure for half duplex
mode).
8.
Bandwidth In/Out:
per port packet transmission rate control. Per level is
100Kbps. It supports individual control method of TX and RX.
9.
Priority:
set port to high or low priority.
10.
Security:
enable or disable port security function.
11. Select the
<Save>
.
Port Configuration interface
Trunk Configuration
You can configure port trunk group.
1. Select
<Edit>
2. Using “
Tab
” key move to the port that want to be added into trunk group.
3. Using “
Space
” key to mark the port.
4. Using
Tab
key move to “
Trunk #
” (ex. Trunk 1, Trunk 2…) to change the Trunk
26