TRENDnet TEG-S2620is, User Manual, Page: 13 / 124

1000(Gigabit port)
#25, #26 port
Green In 1000Mbps connection speed
100(Gigabit port)
#25, #26 port
Orange In 100Mbps connection speed
LNK/ACT (Gigabit
port)
#25, #26 port
Green The port is connecting with the device.
Blink The port is receiving or transmitting data.
Off No device attached
FDX/COL (Gigabit
port)
#25, #26 port
Orange The port is operating in Full-duplex mode
Blink Collision of Packets occurs in the port
Off In half-duplex mode
Table 2-1. The Description of LED Indicators
Rear Panel
The 3-pronged power plug is located at the rear Panel of the TEG-S2620is as
shown in Figure 2-3. The Switch will work with AC in the range 100-240V AC,
50-60Hz.
100~240V AC, 50/60Hz
Figure 2-3. The Rear Panel of TEG-S2620is
Desktop Installation
Set the Switch on a sufficiently large flat space with a power outlet nearby. The
surface where you put your Switch should be clean, smooth, level and sturdy.
Make sure there is enough clearance around the Switch to allow attachment of
7