TRENDnet TEG-S2620is, User Manual, Page: 41 / 124

Priority Configuration
You can configure port priority level. There are 0~7-priority level can map to high
or low queue.
1. Select
<Edit>
.
2. Set the Level 0~7 priority, use “
Space
” key to change the value..
3. Press “
Space
” key to select the priority level mapping to high or low queue.
4.
QoS Mode:
select the mode to process incoming packets.
„
First Come first service:
the switch will process the packet that is
coming first.
„
All High Before low:
the packet priority is high will be process before
the packet priority is low.
„
Weight Round Ration 2:1:
the switch will process 2 high priority packet
first, the process 1 low priority packet.
„
Weight Round Ration 3:1:
the switch will process 3 high priority packet
first, the process 1 low priority packet.
„
Weight Round Ration 4:1:
the switch will process 4 high priority packet
first, the process 1 low priority packet.
„
Weight Round Ration 5:1:
the switch will process 5 high priority packet
first, the process 1 low priority packet.
„
Weight Round Ration 6:1:
the switch will process 6 high priority packet
first, the process 1 low priority packet.
„
Weight Round Ration 7:1:
the switch will process 7 high priority packet
first, the process 1 low priority packet.
5. Press “
ESC
” goes back action menu line.
6. Select
<Save>
to save all configure value.
35