TRENDnet TEG-S2620is, User Manual, Page: 106 / 124

802.1X
When enabling the IEEE 802.1X function, you can configure the parameters of
this function.
System Configuration
1.
Radius Server IP:
set the Radius Server IP address.
2.
Server Port:
set the UDP destination port for authentication requests to the
specified Radius Server.
3.
Accounting Port:
set the UDP destination port for accounting requests to
the specified Radius Server.
4.
Shared Key:
set an encryption key for use during authentication sessions
with the specified radius server. This key must match the encryption key used
on the Radius Server.
5.
NAS, Identifier:
set the identifier for the radius client.
6. Click
Apply
.
802.1x Configuration – System Configuration interface
100