IQ41x Installation Instructions - Confi guring TG201251 Issue 5, 22-Aug-2014
9
InstallationInstructions-Configuring
IQ41x
25
test outputs
26
Connect PCs and Displays
27
BackupStrategy
28
CloseRotatingCovers
29
Close Panel
O
I
O
I
Switch on
Switch off
Close covers
Re-connect outputs
S
1
InStALLAtIon-ConFIguRIng
(continued)
Open covers
Connect PCs (e.g. for supervisors/tools) and displays as
described in ‘Connect to IQ4’ on page 10.
Connection of PCs, displays etc can be made directly to
controller via the RS232 Local supervisor Port, USB Local
Engineering Port, or Ethernet port. Connection can also be
made over the Trend network over Ethernet or the current
loop.
Use SET to upload the strategy and compare it with the
strategy held by SET.
Note: An Ethernet connection is required to upload strategy
and backdrop fi les. Other connection types only allow upload
of strategy fi les.
SET Manual (TE200147)
IQ41x
IQ41x
Draft
