10
IQ41x Installation Instructions - Confi guring TG201251 Issue 5, 22-Aug-2014
IQ41x
InstallationInstructions-Configuring
3
Make Connection
1
Switch off
2
openRotatingCovers
3
CoNNECt to IQ4
O
I
PC via Local Engineering Port (USB)
USB cable
Micro B USB connector
Connect Directly to Controller
PC via Ethernet Port
Connection use
Notes
IPTool
ü
SET
ü
Requires vCNC
Web Browser
ü
Supervisor
ü
Requires vCNC
PC via Local Supervisor Port (RS232)
Connection to IQ4 can be made directly via the RS232 Local Supervisor Port, USB Local Engineering Port, or Ethernet Port.
Connection can also be made over a network (Ethernet).
Connection use
Notes
IPTool
SET
ü
Web Browser
Supervisor
Connection use
Notes
IPTool
SET
ü
Web Browser
Supervisor
ü
IQView8 via Local Supervisor Port (RS232)
IQView8 requires its own power supply.
Note: If local supervisor port address is ‘0’ (default)
communication is limited to the IQ4. If non-zero, communication
is possible over the entire network.
RJ45
Standard Ethernet cable
(Cat 5e twisted pair)
max 100 m (109 yds)
RJ45
Cable/EJ101442
9 way female
D type
RJ11
PC
IQView8
RJ11
RJ11
CABLE/EJ105650
Draft
